in , ,

How To Build A Hacking Raspberry Pi 3 – Kali Linux

Kali Linux – Raspberry Pi 3 – For Hacking

How To Install Kali Linux on Raspberry Pi

Kali Linux Raspberry Pi 3

In this tutorial, I will show you how to create a hacking Raspberry Pi 3 that can be controlled remotely, similar to what Elliott on Mr. Robot used to Hack Evil Corp.

The Raspberry Pi is a low-cost, credit-card-sized ARM computer. Despite being a good bit less powerful than a laptop or desktop PC, its affordability makes it an excellent option for a tiny Linux system and it can do far more than act as a media hub.




The Raspberry Pi provides a SD card slot for mass storage and will attempt to boot off that device when the board is powered on.

By default, the Kali Linux Raspberry Pi image has been streamlined with the minimum tools, similar to all the other ARM images. If you wish to upgrade the installation to a standard desktop installation, you can include the extra tools by installing the kali-linux-full metapackage. For more information on metapackages, please refer to our tools page.

Download The ARM Version of Kali Linux

The first step, of course, is to download the ARM version of Kali. Raspberry Pi and many mobile devices use ARM CPUs as they are more energy efficient and cooler, so the Kali operating system must be compiled specifically for it.

Navigate to Offensive Security’s download page to get the Raspberry Pi file. Once you have downloaded the image, unzip it with WinRAR, WinZip, or any other archiving tool that can unzip files.

Install The ARM Version of Kali Linux

On Kali Linux

If all you want to do is install Kali on your Raspberry Pi3, follow these instructions:

  1. Get a nice fast 8 GB micro SD card or eMMC.
  2. Use the dd utility to image this file to your microSD card. In our example, we use a microSD which is located at /dev/sdb. Change this as needed.

xzcat kali-$version-rpi2.img.xz | dd of=/dev/sdb bs=512k

 

On Windows

We need to install the Win32 Disk Imager, which you can download from SourceForge. This tool enables us to write the image to an SD card or USB drive. I recommend a fast SD card of at least 8 GB.

Boot UP The Raspberry Pi3

We need to remove the SD card from your PC and now install the SD card into our Raspberry Pi 3 and boot it up. When it boots up, it takes you to a command line opening asking you for your username and password.

username: root
password: toor

Then type :

kali > startx

This starts the X11 GUI for Kali. Success! Now you have an tiny Kali hacking tool that can be placed anywhere!

Kali Linux on Raspberry Pi 3

All the steps are explained on a Video on our Youtube Channel you can subscribe to it by this link, they are many other tutorials that you can learn about bypassing, hacking and others basics tutorials using kali linux Hacking Distribution.

If you have encountered a problem or you have any questions or remarks please feel free to set a comment.

If this article helped you to solve your problem please feel free to Share it with your friends.


With Love and Prosperity K4LINUX-TEAM.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *